Qualite : pyproject.toml (ruff/pytest/pyright) + CI Gitea (lint/tests/build)

pyproject.toml devient le point d'entree unique de configuration des outils
(pytest.ini supprime, sa config y est deplacee). Les dependances restent dans
requirements.txt/requirements-dev.txt (deja utilises par setup.bat) plutot que
dupliquees ici : ce projet se distribue par PyInstaller, pas par "pip install".

ruff : configure puis passe sur tout app/ + tests/ (154 corrections
automatiques, purement mecaniques - tri des imports, imports multiples sur une
ligne separes, alias depreciees) suivies de 7 corrections manuelles ciblees :
  - app/ssh_connection.py : `raise ... from None` pour le refus explicite de
    passphrase (ce n'est pas un echec a diagnostiquer).
  - app/controllers/workspace_manager.py : zip() sans strict= documente en
    commentaire (deliberement tolerant a un workspace legerement perime).
  - tests/test_ai_redaction.py : nom de variable ambigu renomme.
  - E702 (construction compacte "widget = X(); widget.setY(...)" dans
    sftp_panel.py/tunnel_dialog.py) et E402 (quelques tests qui importent un
    symbole juste avant la section qui l'utilise) : ignores explicitement, ce
    sont des styles deliberes preexistants, pas des oublis.
`ruff check app main.py tests` est desormais propre.

pyright : mode "basic" (le code n'a jamais ete type). Plus de 200 signalements
sur ~300 etaient le meme faux positif connu de l'ecosysteme PySide6 (acces
plat aux enums Qt, ex. Qt.UserRole, valide a l'execution mais que les stubs ne
reconnaissent que sous leur forme imbriquee) : desactive avec justification en
commentaire. Reste un socle de 77 signalements reels (surtout des acces
Optional non filtres dans app/ui/tabs.py et app/ssh_connection.py) : non
corrige dans cette phase - resserrer le typage la ou pyright a raison est un
travail a part, pas une consequence automatique de l'ajout de l'outil. La CI
le lance en mode informatif (continue-on-error) tant que ce socle n'est pas
resorbe.

.gitea/workflows/ci.yml : lint (ruff, bloquant), tests (pytest, bloquant),
typecheck (pyright, informatif), build (PyInstaller, sur main uniquement,
artefact du dossier portable). Necessite un runner Gitea Actions Windows
enregistre - PySide6/pywinpty/Credential Manager/ACL NTFS sont Windows
uniquement, comme l'application elle-meme ; non verifiable depuis ce poste.

Suite complete revalidee apres coup (33/33) pour confirmer qu'aucune des 154
corrections automatiques n'a modifie de comportement.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

.gitea/workflows/ci.yml

@@ -0,0 +1,76 @@
+name: CI
+
+# Runner Windows requis : PySide6/pywinpty/Windows Credential Manager/ACL NTFS
+# ne fonctionnent que sous Windows, comme l'application elle-meme.
+on:
+  push:
+    branches: ["**"]
+  pull_request:
+
+jobs:
+  lint:
+    runs-on: windows
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
+        with:
+          python-version: "3.12"
+      - name: Installer les dependances de developpement
+        run: pip install -r requirements-dev.txt
+      - name: ruff check
+        run: ruff check app main.py tests
+
+  tests:
+    runs-on: windows
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
+        with:
+          python-version: "3.12"
+      - name: Installer les dependances
+        run: pip install -r requirements-dev.txt
+      - name: pytest (rendu Qt hors-ecran)
+        env:
+          QT_QPA_PLATFORM: offscreen
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: "1"
+        run: pytest tests -v
+
+  typecheck:
+    runs-on: windows
+    # Informatif pour l'instant : le code n'a jamais ete type avant cette phase,
+    # 77 signalements (Optional non filtre, principalement dans app/ui/tabs.py
+    # et app/ssh_connection.py) restent a trier au cas par cas. A rendre
+    # bloquant une fois ce fond resorbe - voir le commentaire dans pyproject.toml.
+    continue-on-error: true
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
+        with:
+          python-version: "3.12"
+      - name: Installer les dependances
+        run: pip install -r requirements-dev.txt
+      - name: pyright
+        run: pyright
+
+  build:
+    runs-on: windows
+    needs: [lint, tests]
+    if: github.ref == 'refs/heads/main'
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
+        with:
+          python-version: "3.12"
+      - name: Installer les dependances et PyInstaller
+        run: |
+          pip install -r requirements.txt
+          pip install pyinstaller
+      - name: Generer l'icone
+        run: python tools/make_icon.py
+      - name: Construire l'executable portable
+        run: python -m PyInstaller --noconfirm --clean PySSHClient.spec
+      - uses: actions/upload-artifact@v4
+        with:
+          name: PySSH-Client-portable
+          path: dist/PySSH Client

app/ai/service.py

@@ -4,7 +4,7 @@ from __future__ import annotations
 
 from PySide6.QtCore import QThread, Signal
 
-from app.ai.provider import AIProvider, AIError
+from app.ai.provider import AIError, AIProvider
 
 KIND_EXPLAIN = "explain"
 KIND_DIAGNOSE = "diagnose"

app/ai/settings.py

@@ -8,9 +8,9 @@ from __future__ import annotations
 
 from dataclasses import dataclass
 
+from app.ai.provider import AIProvider, OpenAICompatibleProvider
 from app.app_settings import get_setting, set_setting
 from app.credentials import CredentialStore
-from app.ai.provider import AIProvider, OpenAICompatibleProvider
 
 AI_API_KEY_CREDENTIAL = "ai:api_key"
 

app/bastion.py

@@ -9,12 +9,17 @@ from __future__ import annotations
 
 from dataclasses import dataclass
 
-from app.session_manager import (
-    SessionStore, BastionConfig,
-    BASTION_NONE, BASTION_SESSION, BASTION_OPENSSH, BASTION_MANUAL,
-    AUTH_AUTO, AUTH_KEY,
-)
 from app.credentials import session_credential_key
+from app.session_manager import (
+    AUTH_AUTO,
+    AUTH_KEY,
+    BASTION_MANUAL,
+    BASTION_NONE,
+    BASTION_OPENSSH,
+    BASTION_SESSION,
+    BastionConfig,
+    SessionStore,
+)
 
 
 class BastionResolutionError(Exception):

app/controllers/broadcast_manager.py

@@ -2,7 +2,7 @@
 aussi vers tous les autres onglets terminal ouverts, quand le mode est actif."""
 from __future__ import annotations
 
-from typing import Callable, Iterable
+from collections.abc import Callable, Iterable
 
 from PySide6.QtCore import QObject
 from PySide6.QtWidgets import QToolButton, QWidget

app/controllers/connection_controller.py

@@ -2,21 +2,21 @@
 ouverture, connexion rapide, renommage, fermeture."""
 from __future__ import annotations
 
-from PySide6.QtCore import Qt, Signal, QObject
-from PySide6.QtWidgets import QTabWidget, QWidget, QMenu, QMessageBox, QInputDialog
+from PySide6.QtCore import QObject, Qt, Signal
+from PySide6.QtWidgets import QInputDialog, QMenu, QMessageBox, QTabWidget, QWidget
 
-from app.session_manager import SessionStore, Session, AUTH_PASSWORD, PASSWORD_STORAGE_SECURE
+from app.bastion import BastionResolutionError, BastionTarget, resolve_bastion_target
+from app.controllers.broadcast_manager import BroadcastManager
+from app.credentials import CredentialStore, NullCredentialStore, session_credential_key
+from app.dialogs.connect_prompt import ask_secret
+from app.dialogs.session_dialog import SessionDialog
 from app.key_manager import KeyManager
 from app.local_terminal import DEFAULT_SHELL, SHELL_LABELS
-from app.dialogs.session_dialog import SessionDialog
-from app.dialogs.connect_prompt import ask_secret
-from app.services.ssh_target import detect_ssh_target
 from app.openssh.config import OpenSSHHost, session_from_openssh_host
-from app.bastion import BastionTarget, resolve_bastion_target, BastionResolutionError
-from app.credentials import CredentialStore, NullCredentialStore, session_credential_key
-from app.controllers.broadcast_manager import BroadcastManager
-from app.ui.tabs import BaseTerminalTab, SessionTabWidget, SFTPTabWidget, LocalTerminalTabWidget
-from app.ui.split_pane import SplitContainer, PaneSlot, LAYOUT_LABELS
+from app.services.ssh_target import detect_ssh_target
+from app.session_manager import AUTH_PASSWORD, PASSWORD_STORAGE_SECURE, Session, SessionStore
+from app.ui.split_pane import LAYOUT_LABELS, PaneSlot, SplitContainer
+from app.ui.tabs import BaseTerminalTab, LocalTerminalTabWidget, SessionTabWidget, SFTPTabWidget
 
 
 class ConnectionController(QObject):

app/controllers/session_controller.py

@@ -6,22 +6,33 @@ from __future__ import annotations
 import copy
 import uuid
 
-from PySide6.QtCore import Qt, Signal, QObject
+from PySide6.QtCore import QObject, Qt, Signal
 from PySide6.QtWidgets import (
-    QWidget, QVBoxLayout, QHBoxLayout, QToolButton, QTreeWidget, QTreeWidgetItem,
-    QMenu, QMessageBox, QComboBox, QLabel,
+    QComboBox,
+    QHBoxLayout,
+    QLabel,
+    QMenu,
+    QMessageBox,
+    QToolButton,
+    QTreeWidget,
+    QTreeWidgetItem,
+    QVBoxLayout,
+    QWidget,
 )
 
-from app.session_manager import SessionStore, Session
-from app.key_manager import KeyManager
-from app.groups import GroupSettingsStore
 from app.credentials import CredentialStore, NullCredentialStore, session_credential_key
-from app.local_terminal import SHELL_LABELS
-from app.dialogs.session_dialog import SessionDialog
 from app.dialogs.group_settings_dialog import GroupSettingsDialog
+from app.dialogs.session_dialog import SessionDialog
+from app.groups import GroupSettingsStore
+from app.key_manager import KeyManager
+from app.local_terminal import SHELL_LABELS
 from app.openssh.config import (
-    OpenSSHHost, default_config_path, load_openssh_hosts, session_from_openssh_host,
+    OpenSSHHost,
+    default_config_path,
+    load_openssh_hosts,
+    session_from_openssh_host,
 )
+from app.session_manager import Session, SessionStore
 
 SESSION_ROLE = Qt.UserRole + 10
 LOCAL_SHELL_ROLE = Qt.UserRole + 11

app/controllers/workspace_manager.py

@@ -7,15 +7,20 @@ from PySide6.QtCore import QObject, Signal
 from PySide6.QtWidgets import QWidget
 
 from app.app_settings import get_setting, set_setting
+from app.controllers.connection_controller import ConnectionController
 from app.local_terminal import DEFAULT_SHELL
 from app.session_manager import SessionStore
+from app.ui.split_pane import LAYOUT_SINGLE, SplitContainer
+from app.ui.tabs import LocalTerminalTabWidget, SessionTabWidget, SFTPTabWidget
 from app.workspace import (
-    Workspace, WorkspaceStore, WorkspaceTab, WorkspaceItem,
-    ITEM_SESSION_SSH, ITEM_SESSION_SFTP, ITEM_LOCAL_SHELL,
+    ITEM_LOCAL_SHELL,
+    ITEM_SESSION_SFTP,
+    ITEM_SESSION_SSH,
+    Workspace,
+    WorkspaceItem,
+    WorkspaceStore,
+    WorkspaceTab,
 )
-from app.ui.tabs import SessionTabWidget, SFTPTabWidget, LocalTerminalTabWidget
-from app.ui.split_pane import SplitContainer, LAYOUT_SINGLE
-from app.controllers.connection_controller import ConnectionController
 
 SETTING_RESTORE_ON_STARTUP = "restore_last_workspace"
 SETTING_LAST_WORKSPACE_ID = "last_workspace_id"
@@ -152,7 +157,12 @@ class WorkspaceManager(QObject):
         self.cc.split_tab(index, wtab.layout)
         container = self.cc.tabs.widget(index)
         skipped = 0
-        for pane, item in zip(container.panes[1:], wtab.items[1:]):
+        # strict=True est volontairement evite : un workspace legerement perime
+        # (enregistre par une version anterieure, ou modifie a la main) peut avoir
+        # une liste d'items plus courte que le nombre de panneaux - on restaure
+        # alors ce qui correspond et on laisse les panneaux excedentaires a leur
+        # terminal local par defaut, plutot que d'abandonner toute la restauration.
+        for pane, item in zip(container.panes[1:], wtab.items[1:]):  # noqa: B905
             widget = self._widget_for_item(item)
             if widget is None:
                 skipped += 1

app/dialogs/ai_command_dialog.py

@@ -6,7 +6,13 @@ from __future__ import annotations
 import re
 
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QTextEdit, QPushButton, QLabel, QApplication,
+    QApplication,
+    QDialog,
+    QHBoxLayout,
+    QLabel,
+    QPushButton,
+    QTextEdit,
+    QVBoxLayout,
 )
 
 _CODE_BLOCK_RE = re.compile(r"```(?:[a-zA-Z0-9_+-]*\n)?(.*?)```", re.DOTALL)

app/dialogs/ai_prompts.py

@@ -6,8 +6,8 @@ from __future__ import annotations
 
 from PySide6.QtWidgets import QMessageBox
 
-from app.app_settings import get_setting, set_setting
 from app.ai.redaction import detect_secrets
+from app.app_settings import get_setting, set_setting
 
 _NOTICE_ACK_KEY = "ai_notice_acknowledged"
 

app/dialogs/ai_settings_dialog.py

@@ -4,13 +4,21 @@ compatibles avec l'API OpenAI (OpenAI, OpenRouter, proxy interne, LLM local...).
 from __future__ import annotations
 
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QFormLayout, QLineEdit, QCheckBox, QDoubleSpinBox,
-    QPushButton, QDialogButtonBox, QMessageBox, QLabel,
+    QCheckBox,
+    QDialog,
+    QDialogButtonBox,
+    QDoubleSpinBox,
+    QFormLayout,
+    QLabel,
+    QLineEdit,
+    QMessageBox,
+    QPushButton,
+    QVBoxLayout,
 )
 
-from app.ai.settings import AISettings, load_ai_settings, save_ai_settings, load_api_key, save_api_key
 from app.ai.provider import OpenAICompatibleProvider
 from app.ai.service import KIND_TEST, AIRequestWorker
+from app.ai.settings import AISettings, load_ai_settings, load_api_key, save_ai_settings, save_api_key
 from app.credentials import CredentialStore, NullCredentialStore
 
 

app/dialogs/group_settings_dialog.py

@@ -3,17 +3,36 @@ d'une nouvelle session dans ce dossier (voir app.groups)."""
 from __future__ import annotations
 
 from PySide6.QtWidgets import (
-    QDialog, QFormLayout, QLineEdit, QSpinBox, QComboBox, QDialogButtonBox,
-    QHBoxLayout, QPushButton, QWidget, QVBoxLayout, QCheckBox, QStackedWidget, QLabel,
+    QCheckBox,
+    QComboBox,
+    QDialog,
+    QDialogButtonBox,
+    QFormLayout,
+    QHBoxLayout,
+    QLabel,
+    QLineEdit,
+    QPushButton,
+    QSpinBox,
+    QStackedWidget,
+    QVBoxLayout,
+    QWidget,
 )
 
-from app.session_manager import (
-    SessionStore, BastionConfig, AUTH_AUTO, AUTH_KEY, AUTH_PASSWORD, AUTH_AGENT,
-    BASTION_NONE, BASTION_SESSION, BASTION_OPENSSH, BASTION_MANUAL,
-)
-from app.key_manager import KeyManager
 from app.groups import GroupSettings, GroupSettingsStore
+from app.key_manager import KeyManager
 from app.openssh.config import load_openssh_hosts
+from app.session_manager import (
+    AUTH_AGENT,
+    AUTH_AUTO,
+    AUTH_KEY,
+    AUTH_PASSWORD,
+    BASTION_MANUAL,
+    BASTION_NONE,
+    BASTION_OPENSSH,
+    BASTION_SESSION,
+    BastionConfig,
+    SessionStore,
+)
 
 
 class GroupSettingsDialog(QDialog):

app/dialogs/key_dialog.py

@@ -5,13 +5,28 @@ from pathlib import Path
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QListWidget, QListWidgetItem, QPushButton,
-    QMessageBox, QFileDialog, QFormLayout, QLineEdit, QComboBox, QSpinBox,
-    QDialogButtonBox, QApplication, QLabel,
+    QApplication,
+    QComboBox,
+    QDialog,
+    QDialogButtonBox,
+    QFileDialog,
+    QFormLayout,
+    QHBoxLayout,
+    QLabel,
+    QLineEdit,
+    QListWidget,
+    QListWidgetItem,
+    QMessageBox,
+    QPushButton,
+    QSpinBox,
+    QVBoxLayout,
 )
 
 from app.key_manager import (
-    KeyManager, KEY_TYPE_ED25519, KEY_TYPE_RSA, KEY_TYPE_LABELS, KEY_TYPE_DESCRIPTIONS,
+    KEY_TYPE_DESCRIPTIONS,
+    KEY_TYPE_LABELS,
+    KEY_TYPE_RSA,
+    KeyManager,
 )
 
 

app/dialogs/known_hosts_dialog.py

@@ -3,8 +3,15 @@ from __future__ import annotations
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QTreeWidget, QTreeWidgetItem, QPushButton,
-    QMessageBox, QLabel, QAbstractItemView,
+    QAbstractItemView,
+    QDialog,
+    QHBoxLayout,
+    QLabel,
+    QMessageBox,
+    QPushButton,
+    QTreeWidget,
+    QTreeWidgetItem,
+    QVBoxLayout,
 )
 
 from app.known_hosts_manager import KnownHostsStore

app/dialogs/quick_connect_dialog.py

@@ -2,12 +2,17 @@
 snippets et actions, avec recherche floue et navigation entierement au clavier."""
 from __future__ import annotations
 
+from collections.abc import Callable
 from dataclasses import dataclass, field
-from typing import Callable
 
-from PySide6.QtCore import Qt, QEvent
+from PySide6.QtCore import QEvent, Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QLineEdit, QListWidget, QListWidgetItem, QMessageBox,
+    QDialog,
+    QLineEdit,
+    QListWidget,
+    QListWidgetItem,
+    QMessageBox,
+    QVBoxLayout,
 )
 
 from app.openssh.config import load_openssh_hosts
@@ -111,9 +116,9 @@ class QuickConnectDialog(QDialog):
         return results
 
     def _quick_actions(self) -> list[tuple[str, Callable[[], None]]]:
-        from app.dialogs.workspace_dialog import WorkspaceDialog
-        from app.dialogs.snippet_dialog import SnippetManagerDialog
         from app.dialogs.key_dialog import KeyManagerDialog
+        from app.dialogs.snippet_dialog import SnippetManagerDialog
+        from app.dialogs.workspace_dialog import WorkspaceDialog
 
         return [
             ("Nouvelle session...", self.session_controller.new_session),

app/dialogs/session_dialog.py

@@ -3,20 +3,44 @@ from __future__ import annotations
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QFormLayout, QLineEdit, QSpinBox, QComboBox, QDialogButtonBox,
-    QHBoxLayout, QPushButton, QTextEdit, QFileDialog, QWidget, QVBoxLayout,
-    QCheckBox, QMessageBox, QGroupBox, QStackedWidget, QCompleter,
+    QCheckBox,
+    QComboBox,
+    QCompleter,
+    QDialog,
+    QDialogButtonBox,
+    QFileDialog,
+    QFormLayout,
+    QGroupBox,
+    QHBoxLayout,
+    QLineEdit,
+    QMessageBox,
+    QPushButton,
+    QSpinBox,
+    QStackedWidget,
+    QTextEdit,
+    QVBoxLayout,
+    QWidget,
 )
 
-from app.session_manager import (
-    Session, SessionStore, BastionConfig, AUTH_AUTO, AUTH_KEY, AUTH_PASSWORD, AUTH_AGENT,
-    BASTION_NONE, BASTION_SESSION, BASTION_OPENSSH, BASTION_MANUAL,
-    PASSWORD_STORAGE_NONE, PASSWORD_STORAGE_SECURE,
-)
+from app.credentials import CredentialStore, NullCredentialStore, session_credential_key
+from app.groups import GroupSettingsStore
 from app.key_manager import KeyManager
 from app.openssh.config import load_openssh_hosts
-from app.groups import GroupSettingsStore
-from app.credentials import CredentialStore, NullCredentialStore, session_credential_key
+from app.session_manager import (
+    AUTH_AGENT,
+    AUTH_AUTO,
+    AUTH_KEY,
+    AUTH_PASSWORD,
+    BASTION_MANUAL,
+    BASTION_NONE,
+    BASTION_OPENSSH,
+    BASTION_SESSION,
+    PASSWORD_STORAGE_NONE,
+    PASSWORD_STORAGE_SECURE,
+    BastionConfig,
+    Session,
+    SessionStore,
+)
 
 
 class SessionDialog(QDialog):

app/dialogs/snippet_dialog.py

@@ -4,8 +4,19 @@ from __future__ import annotations
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QTreeWidget, QTreeWidgetItem, QPushButton,
-    QMessageBox, QLineEdit, QLabel, QFormLayout, QTextEdit, QDialogButtonBox, QComboBox,
+    QComboBox,
+    QDialog,
+    QDialogButtonBox,
+    QFormLayout,
+    QHBoxLayout,
+    QLabel,
+    QLineEdit,
+    QMessageBox,
+    QPushButton,
+    QTextEdit,
+    QTreeWidget,
+    QTreeWidgetItem,
+    QVBoxLayout,
 )
 
 from app.snippets import Snippet, SnippetStore

app/dialogs/tunnel_dialog.py

@@ -3,8 +3,19 @@ from __future__ import annotations
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QFormLayout, QTreeWidget, QTreeWidgetItem,
-    QPushButton, QComboBox, QSpinBox, QLineEdit, QLabel, QMessageBox, QAbstractItemView,
+    QAbstractItemView,
+    QComboBox,
+    QDialog,
+    QFormLayout,
+    QHBoxLayout,
+    QLabel,
+    QLineEdit,
+    QMessageBox,
+    QPushButton,
+    QSpinBox,
+    QTreeWidget,
+    QTreeWidgetItem,
+    QVBoxLayout,
 )
 
 from app.tunnels import DIRECTION_DYNAMIC, DIRECTION_LABELS, TunnelManager, describe

app/dialogs/workspace_dialog.py

@@ -3,12 +3,20 @@ from __future__ import annotations
 
 from PySide6.QtCore import Qt
 from PySide6.QtWidgets import (
-    QDialog, QVBoxLayout, QHBoxLayout, QListWidget, QListWidgetItem, QPushButton,
-    QMessageBox, QInputDialog, QLabel, QCheckBox,
+    QCheckBox,
+    QDialog,
+    QHBoxLayout,
+    QInputDialog,
+    QLabel,
+    QListWidget,
+    QListWidgetItem,
+    QMessageBox,
+    QPushButton,
+    QVBoxLayout,
 )
 
 from app.app_settings import get_setting, set_setting
-from app.controllers.workspace_manager import WorkspaceManager, SETTING_RESTORE_ON_STARTUP
+from app.controllers.workspace_manager import SETTING_RESTORE_ON_STARTUP, WorkspaceManager
 
 
 class WorkspaceDialog(QDialog):

app/groups.py

@@ -9,12 +9,12 @@ librement modifiables, sans indirection a suivre dans tout le reste du code
 (ConnectionController, SSHConnection, resolve_bastion_target...)."""
 from __future__ import annotations
 
-from dataclasses import dataclass, field, asdict
+from dataclasses import asdict, dataclass, field
 from pathlib import Path
 
 from app.paths import DATA_DIR
+from app.session_manager import AUTH_AUTO, BastionConfig
 from app.storage.json_store import load_json_document, save_json_document
-from app.session_manager import BastionConfig, AUTH_AUTO
 
 GROUPS_FILE = DATA_DIR / "groups.json"
 SCHEMA_VERSION = 1
@@ -36,7 +36,7 @@ class GroupSettings:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "GroupSettings":
+    def from_dict(data: dict) -> GroupSettings:
         g = GroupSettings()
         for k in GroupSettings.__dataclass_fields__:
             if k not in data:

app/key_manager.py

@@ -5,16 +5,16 @@ import base64
 import hashlib
 import shutil
 import uuid
-from dataclasses import dataclass, field, asdict
+from dataclasses import asdict, dataclass, field
 from pathlib import Path
 
 import paramiko
 from cryptography.hazmat.primitives import serialization
-from cryptography.hazmat.primitives.asymmetric import rsa, ed25519, ec
+from cryptography.hazmat.primitives.asymmetric import ec, ed25519, rsa
 
 from app.paths import DATA_DIR  # noqa: E402  (chemins valables aussi en .exe)
-from app.storage.json_store import load_json_document, save_json_document
 from app.security.key_protection import protect_private_key
+from app.storage.json_store import load_json_document, save_json_document
 
 KEYS_FILE = DATA_DIR / "keys.json"
 DEFAULT_KEY_DIR = DATA_DIR / "keys"
@@ -116,7 +116,7 @@ class KeyEntry:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "KeyEntry":
+    def from_dict(data: dict) -> KeyEntry:
         e = KeyEntry()
         for k in KeyEntry.__dataclass_fields__:
             if k in data:

app/main_window.py

@@ -9,33 +9,37 @@ from __future__ import annotations
 from PySide6.QtCore import Qt
 from PySide6.QtGui import QAction, QActionGroup, QKeySequence
 from PySide6.QtWidgets import (
-    QMainWindow, QDockWidget, QMessageBox, QStatusBar, QApplication,
+    QApplication,
+    QDockWidget,
+    QMainWindow,
+    QMessageBox,
+    QStatusBar,
 )
 
-from app.session_manager import SessionStore
-from app.key_manager import KeyManager
-from app.local_terminal import SHELL_LABELS, DEFAULT_SHELL
-from app.terminal_widget import TerminalWidget
+from app.ai.settings import build_provider_from_settings
+from app.controllers.broadcast_manager import BroadcastManager
+from app.controllers.connection_controller import ConnectionController
+from app.controllers.session_controller import SessionController
+from app.controllers.workspace_manager import WorkspaceManager
+from app.credentials import default_credential_store
+from app.dialogs.ai_settings_dialog import AISettingsDialog
 from app.dialogs.key_dialog import KeyManagerDialog
 from app.dialogs.known_hosts_dialog import KnownHostsDialog
-from app.dialogs.workspace_dialog import WorkspaceDialog
-from app.dialogs.snippet_dialog import SnippetManagerDialog
 from app.dialogs.quick_connect_dialog import QuickConnectDialog
-from app.dialogs.ai_settings_dialog import AISettingsDialog
-from app.ai.settings import build_provider_from_settings
-from app.theme import THEME_LABELS, apply_theme, current_theme, save_theme
-from app.workspace import WorkspaceStore
-from app.snippets import SnippetStore
+from app.dialogs.snippet_dialog import SnippetManagerDialog
+from app.dialogs.workspace_dialog import WorkspaceDialog
 from app.groups import GroupSettingsStore
-from app.credentials import default_credential_store
-from app.controllers.broadcast_manager import BroadcastManager
-from app.controllers.session_controller import SessionController
-from app.controllers.connection_controller import ConnectionController
-from app.controllers.workspace_manager import WorkspaceManager
-from app.ui.split_pane import SplitContainer
+from app.key_manager import KeyManager
+from app.local_terminal import DEFAULT_SHELL, SHELL_LABELS
 
 # re-exporte pour compatibilite (utilise par tests/test_detect.py et du code existant)
 from app.services.ssh_target import detect_ssh_target  # noqa: F401
+from app.session_manager import SessionStore
+from app.snippets import SnippetStore
+from app.terminal_widget import TerminalWidget
+from app.theme import THEME_LABELS, apply_theme, current_theme, save_theme
+from app.ui.split_pane import SplitContainer
+from app.workspace import WorkspaceStore
 
 
 class MainWindow(QMainWindow):

app/openssh/config.py

@@ -14,7 +14,7 @@ from pathlib import Path
 
 import paramiko
 
-from app.session_manager import Session, BastionConfig, AUTH_AUTO, AUTH_KEY, BASTION_OPENSSH
+from app.session_manager import AUTH_AUTO, AUTH_KEY, BASTION_OPENSSH, BastionConfig, Session
 
 
 @dataclass
@@ -57,7 +57,7 @@ def load_openssh_hosts(path: Path | None = None) -> list[OpenSSHHost]:
 
     parser = paramiko.SSHConfig()
     try:
-        with open(path, "r", encoding="utf-8", errors="replace") as f:
+        with open(path, encoding="utf-8", errors="replace") as f:
             parser.parse(f)
     except OSError:
         return []

app/session_manager.py

@@ -2,7 +2,7 @@
 from __future__ import annotations
 
 import uuid
-from dataclasses import dataclass, field, asdict
+from dataclasses import asdict, dataclass, field
 from pathlib import Path
 
 from app.paths import DATA_DIR  # noqa: E402  (chemins valables aussi en .exe)
@@ -50,7 +50,7 @@ class BastionConfig:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "BastionConfig":
+    def from_dict(data: dict) -> BastionConfig:
         b = BastionConfig()
         for k in BastionConfig.__dataclass_fields__:
             if k in data:
@@ -95,7 +95,7 @@ class Session:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "Session":
+    def from_dict(data: dict) -> Session:
         known = {f: data.get(f) for f in Session.__dataclass_fields__ if f in data}
         s = Session()
         for k, v in known.items():

app/sftp/worker.py

@@ -11,8 +11,9 @@ from __future__ import annotations
 
 import queue
 import threading
+from collections.abc import Callable
 from dataclasses import dataclass
-from typing import Any, Callable
+from typing import Any
 
 from PySide6.QtCore import QThread, Signal
 

app/sftp_panel.py

@@ -5,18 +5,30 @@ from __future__ import annotations
 import json
 import os
 import posixpath
-import tempfile
 import stat
+import tempfile
 from datetime import datetime
 from pathlib import Path
 
 import paramiko
-from PySide6.QtCore import Qt, QThread, Signal, QMimeData, QPoint, QFileSystemWatcher
+from PySide6.QtCore import QFileSystemWatcher, QMimeData, QPoint, Qt, QThread, Signal
 from PySide6.QtGui import QDrag, QKeySequence, QShortcut
 from PySide6.QtWidgets import (
-    QWidget, QVBoxLayout, QHBoxLayout, QLineEdit, QToolButton, QTreeWidget,
-    QTreeWidgetItem, QSplitter, QLabel, QMessageBox, QInputDialog, QProgressDialog,
-    QAbstractItemView, QMenu, QHeaderView,
+    QAbstractItemView,
+    QHBoxLayout,
+    QHeaderView,
+    QInputDialog,
+    QLabel,
+    QLineEdit,
+    QMenu,
+    QMessageBox,
+    QProgressDialog,
+    QSplitter,
+    QToolButton,
+    QTreeWidget,
+    QTreeWidgetItem,
+    QVBoxLayout,
+    QWidget,
 )
 
 from app.sftp.worker import SftpWorker
@@ -125,7 +137,7 @@ class TransferWorker(QThread):
     def _upload_dir(self, local_dir: str, remote_dir: str) -> None:
         try:
             self.sftp.mkdir(remote_dir)
-        except IOError:
+        except OSError:
             pass
         for entry in os.listdir(local_dir):
             if self._cancel:
@@ -615,7 +627,7 @@ class RemoteFilePanel(FilePanel):
                         self._rmdir_recursive(path)
                     else:
                         self.sftp.remove(path)
-                except IOError as exc:
+                except OSError as exc:
                     errors.append(f"{name} : {exc}")
             return errors
 
@@ -745,7 +757,7 @@ class RemoteFilePanel(FilePanel):
             for entry_name, _ in entries:
                 try:
                     self.sftp.chmod(self.join(current_path, entry_name), mode)
-                except IOError as exc:
+                except OSError as exc:
                     errors.append(f"{entry_name} : {exc}")
             return errors
 

app/snippets.py

@@ -3,7 +3,7 @@ depuis un terminal (inserer sans executer, executer, executer avec Multi-Send)."
 from __future__ import annotations
 
 import uuid
-from dataclasses import dataclass, field, asdict
+from dataclasses import asdict, dataclass, field
 from pathlib import Path
 
 from app.paths import DATA_DIR
@@ -25,7 +25,7 @@ class Snippet:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "Snippet":
+    def from_dict(data: dict) -> Snippet:
         s = Snippet()
         for k in Snippet.__dataclass_fields__:
             if k in data:

app/ssh_connection.py

@@ -7,17 +7,17 @@ import threading
 import paramiko
 from PySide6.QtCore import QThread, Signal
 
-from app.known_hosts_manager import KnownHostsStore
 from app.bastion import BastionTarget
-
+from app.known_hosts_manager import KnownHostsStore
 from app.paths import DATA_DIR  # noqa: E402  (chemins valables aussi en .exe)
+
 KNOWN_HOSTS_FILE = DATA_DIR / "known_hosts"
 
 
 class TrustPrompt(paramiko.MissingHostKeyPolicy):
     """Politique qui demande confirmation (via signal Qt) avant de faire confiance a une nouvelle cle d'hote."""
 
-    def __init__(self, connection: "SSHConnection"):
+    def __init__(self, connection: SSHConnection):
         self.connection = connection
 
     def missing_host_key(self, client, hostname, key):
@@ -379,7 +379,10 @@ class SSHConnection(QThread):
             except paramiko.PasswordRequiredException:
                 pwd = passphrase or self._ask_passphrase(key_path)
                 if not pwd:
-                    raise paramiko.SSHException("Passphrase requise pour deverrouiller la cle")
+                    # l'utilisateur a annule la demande de passphrase : ce n'est pas un
+                    # echec a diagnostiquer, la PasswordRequiredException d'origine n'a
+                    # rien a apporter au message affiche.
+                    raise paramiko.SSHException("Passphrase requise pour deverrouiller la cle") from None
                 try:
                     return loader.from_private_key_file(key_path, password=pwd)
                 except paramiko.SSHException as exc:

app/storage/json_store.py

@@ -13,8 +13,8 @@ plutot que de perdre les donnees de l'utilisateur.
 from __future__ import annotations
 
 import json
+from collections.abc import Callable
 from pathlib import Path
-from typing import Callable
 
 from app.storage.atomic_file import atomic_write_bytes
 

app/terminal_widget.py

@@ -11,9 +11,14 @@ from __future__ import annotations
 import pyte
 from PySide6.QtCore import QRect, Qt, Signal
 from PySide6.QtGui import (
-    QColor, QFont, QFontMetrics, QPainter, QKeyEvent, QWheelEvent,
+    QColor,
+    QFont,
+    QFontMetrics,
+    QKeyEvent,
+    QPainter,
+    QWheelEvent,
 )
-from PySide6.QtWidgets import QWidget, QApplication, QScrollBar
+from PySide6.QtWidgets import QApplication, QScrollBar, QWidget
 
 from app import theme as app_theme
 

app/theme.py

@@ -9,11 +9,11 @@ from __future__ import annotations
 from string import Template
 
 from PySide6.QtCore import Qt
-from PySide6.QtGui import QIcon, QPixmap, QPainter, QColor, QFont, QLinearGradient
+from PySide6.QtGui import QColor, QFont, QIcon, QLinearGradient, QPainter, QPixmap
 from PySide6.QtWidgets import QApplication
 
-from app.paths import RESOURCES_DIR  # noqa: E402  (chemins valables aussi en .exe)
 from app.app_settings import get_setting, set_setting
+from app.paths import RESOURCES_DIR  # noqa: E402  (chemins valables aussi en .exe)
 
 STYLESHEET_PATH = RESOURCES_DIR / "theme.qss"
 

app/tunnels.py

@@ -60,7 +60,7 @@ def _relay(sock: socket.socket, chan: paramiko.Channel) -> None:
                 if not data:
                     break
                 sock.sendall(data)
-    except (OSError, socket.error):
+    except OSError:
         pass
     finally:
         for closeable in (chan, sock):

app/ui/ai_panel.py

@@ -10,12 +10,19 @@ from __future__ import annotations
 import html
 
 from PySide6.QtWidgets import (
-    QWidget, QVBoxLayout, QHBoxLayout, QTextEdit, QPushButton, QLabel, QLineEdit, QApplication,
+    QApplication,
+    QHBoxLayout,
+    QLabel,
+    QLineEdit,
+    QPushButton,
+    QTextEdit,
+    QVBoxLayout,
+    QWidget,
 )
 
-from app.ai.service import AIRequestWorker, KIND_ASK
 from app.ai.redaction import redact
-from app.dialogs.ai_prompts import ensure_ai_notice_acknowledged, confirm_sensitive_content, MASK, CANCEL
+from app.ai.service import KIND_ASK, AIRequestWorker
+from app.dialogs.ai_prompts import CANCEL, MASK, confirm_sensitive_content, ensure_ai_notice_acknowledged
 
 _KIND_LABELS = {
     "explain": "Expliquer cette sortie",

app/ui/split_pane.py

@@ -7,11 +7,16 @@ existant (SessionTabWidget, LocalTerminalTabWidget, ...) sans le modifier.
 """
 from __future__ import annotations
 
-from typing import Callable
+from collections.abc import Callable
 
 from PySide6.QtCore import Qt, Signal
 from PySide6.QtWidgets import (
-    QWidget, QVBoxLayout, QHBoxLayout, QSplitter, QToolButton, QFrame,
+    QFrame,
+    QHBoxLayout,
+    QSplitter,
+    QToolButton,
+    QVBoxLayout,
+    QWidget,
 )
 
 LAYOUT_SINGLE = "1"

app/ui/tabs.py

@@ -11,31 +11,41 @@ import re
 from datetime import datetime
 from pathlib import Path
 
-from PySide6.QtCore import Qt, Signal, QTimer
+from PySide6.QtCore import Qt, QTimer, Signal
 from PySide6.QtGui import QKeySequence, QShortcut
 from PySide6.QtWidgets import (
-    QWidget, QVBoxLayout, QHBoxLayout, QToolButton, QLabel, QMessageBox, QSplitter,
-    QFrame, QLineEdit, QFileDialog, QMenu, QInputDialog,
+    QFileDialog,
+    QFrame,
+    QHBoxLayout,
+    QInputDialog,
+    QLabel,
+    QLineEdit,
+    QMenu,
+    QMessageBox,
+    QSplitter,
+    QToolButton,
+    QVBoxLayout,
+    QWidget,
 )
 
-from app.session_manager import Session, AUTH_KEY, AUTH_PASSWORD
-from app.ssh_connection import SSHConnection
-from app.local_terminal import LocalTerminalConnection, SHELL_POWERSHELL, SHELL_LABELS
-from app.terminal_widget import TerminalWidget
-from app.sftp_panel import SFTPPanel
-from app.dialogs.tunnel_dialog import TunnelDialog
-from app.dialogs.snippet_dialog import SnippetManagerDialog
-from app.tunnels import TunnelManager
-from app.dialogs.connect_prompt import ask_secret, confirm_host_key, confirm_host_key_change
-from app.services.ssh_target import detect_ssh_target
-from app.services.reconnect import compute_backoff_delay
-from app.snippets import Snippet, SnippetStore
-from app.ai.service import KIND_EXPLAIN, KIND_DIAGNOSE, KIND_SOLUTION, KIND_GENERATE, AIRequestWorker
 from app.ai.danger import check_dangerous
 from app.ai.redaction import redact
-from app.ui.ai_panel import AIPanel
+from app.ai.service import KIND_DIAGNOSE, KIND_EXPLAIN, KIND_GENERATE, KIND_SOLUTION, AIRequestWorker
 from app.dialogs.ai_command_dialog import AICommandDialog
-from app.dialogs.ai_prompts import ensure_ai_notice_acknowledged, confirm_sensitive_content, MASK, CANCEL
+from app.dialogs.ai_prompts import CANCEL, MASK, confirm_sensitive_content, ensure_ai_notice_acknowledged
+from app.dialogs.connect_prompt import ask_secret, confirm_host_key, confirm_host_key_change
+from app.dialogs.snippet_dialog import SnippetManagerDialog
+from app.dialogs.tunnel_dialog import TunnelDialog
+from app.local_terminal import SHELL_LABELS, SHELL_POWERSHELL, LocalTerminalConnection
+from app.services.reconnect import compute_backoff_delay
+from app.services.ssh_target import detect_ssh_target
+from app.session_manager import AUTH_KEY, AUTH_PASSWORD, Session
+from app.sftp_panel import SFTPPanel
+from app.snippets import Snippet, SnippetStore
+from app.ssh_connection import SSHConnection
+from app.terminal_widget import TerminalWidget
+from app.tunnels import TunnelManager
+from app.ui.ai_panel import AIPanel
 
 # sequences d'echappement ANSI, retirees des journaux pour qu'ils restent lisibles
 ANSI_ESCAPE_RE = re.compile(

app/workspace.py

@@ -7,7 +7,7 @@ mot de passe/passphrase exactement comme une ouverture normale)."""
 from __future__ import annotations
 
 import uuid
-from dataclasses import dataclass, field, asdict
+from dataclasses import asdict, dataclass, field
 from pathlib import Path
 
 from app.paths import DATA_DIR
@@ -32,7 +32,7 @@ class WorkspaceItem:
         return asdict(self)
 
     @staticmethod
-    def from_dict(data: dict) -> "WorkspaceItem":
+    def from_dict(data: dict) -> WorkspaceItem:
         item = WorkspaceItem()
         for k in WorkspaceItem.__dataclass_fields__:
             if k in data:
@@ -56,7 +56,7 @@ class WorkspaceTab:
         }
 
     @staticmethod
-    def from_dict(data: dict) -> "WorkspaceTab":
+    def from_dict(data: dict) -> WorkspaceTab:
         tab = WorkspaceTab(title=data.get("title", ""), layout=data.get("layout", "1"))
         tab.items = [WorkspaceItem.from_dict(i) for i in data.get("items", [])]
         tab.splitter_sizes = [list(s) for s in data.get("splitter_sizes", [])]
@@ -73,7 +73,7 @@ class Workspace:
         return {"id": self.id, "name": self.name, "tabs": [t.to_dict() for t in self.tabs]}
 
     @staticmethod
-    def from_dict(data: dict) -> "Workspace":
+    def from_dict(data: dict) -> Workspace:
         ws = Workspace(id=data.get("id") or str(uuid.uuid4()), name=data.get("name", ""))
         ws.tabs = [WorkspaceTab.from_dict(t) for t in data.get("tabs", [])]
         return ws

pyproject.toml

@@ -0,0 +1,61 @@
+[project]
+name = "pyssh-client"
+version = "0.1.0"
+description = "Client SSH/SFTP local (PySide6) : terminaux, tunnels, snippets, workspaces, assistant IA optionnel"
+readme = "README.md"
+requires-python = ">=3.10"
+
+# Les dependances (runtime et dev) restent dans requirements.txt /
+# requirements-dev.txt, deja utilises par setup.bat et la CI : les dupliquer
+# ici cree un risque de desynchronisation pour aucun benefice reel, puisque
+# le projet se distribue par PyInstaller (voir PySSHClient.spec), pas par
+# "pip install". Ce fichier sert de point d'entree unique pour la
+# configuration des outils (ruff, pytest, pyright).
+
+[tool.ruff]
+line-length = 110
+target-version = "py310"
+extend-exclude = ["venv", "build", "dist"]
+
+[tool.ruff.lint]
+select = ["E", "F", "I", "UP", "B"]
+ignore = [
+    "E501",  # ligne trop longue : laisse au formateur, pas bloquant en l'etat
+    "E702",  # construction compacte "widget = X(); widget.setY(...)" deliberee
+             # dans les panneaux SFTP/tunnels (un widget + sa config tiennent sur
+             # une ligne) : reecrire l'existant pour ca serait pur churn.
+    "E402",  # plusieurs tests importent un symbole juste avant la section qui
+             # l'utilise pour la premiere fois, plutot qu'en haut du fichier -
+             # lisible dans des scripts sequentiels longs, et sans risque tant
+             # que l'import n'a pas d'effet de bord ordonne.
+]
+
+[tool.ruff.lint.isort]
+known-first-party = ["app"]
+
+[tool.pytest.ini_options]
+testpaths = ["tests"]
+python_files = ["test_all_scripts.py"]
+
+[tool.pyright]
+include = ["app", "main.py"]
+exclude = ["venv", "build", "dist", "tests"]
+venvPath = "."
+venv = "venv"
+# "basic" plutot que "strict" : le code n'a jamais ete type jusqu'ici, un mode
+# strict noierait les vrais signaux sous des milliers d'avertissements de
+# typage progressif. A resserrer progressivement, fichier par fichier.
+typeCheckingMode = "basic"
+pythonVersion = "3.10"
+reportMissingImports = true
+# Desactive : plus de 200 occurrences sont l'acces "plat" aux enums Qt
+# (Qt.UserRole, QToolButton.InstantPopup...) - un style PyQt5 historique que
+# PySide6 continue de supporter a l'execution, mais que ses stubs ne
+# reconnaissent qu'a travers leur forme imbriquee (Qt.ItemDataRole.UserRole).
+# Utilise partout dans ce projet, sans exception, et sans le moindre risque
+# reel : le desactiver evite de noyer les vrais signaux. Le reste (une
+# vingtaine de cas ou pyright perd le fil sur des patterns dynamiques - le
+# monkey-patching de pyte dans terminal_widget.py, les QWidget generiques de
+# split_pane.py) reste dans le rapport, a regarder au cas par cas plutot que
+# supprime en bloc.
+reportAttributeAccessIssue = false

pytest.ini

@@ -1,3 +0,0 @@
-[pytest]
-testpaths = tests
-python_files = test_all_scripts.py

requirements-dev.txt

@@ -1,3 +1,5 @@
 -r requirements.txt
 pytest>=8.0
 pytest-qt>=4.4
+ruff>=0.6
+pyright>=1.1

tests/test_ai_command_dialog.py

@@ -1,7 +1,9 @@
 """AICommandDialog : extraction de la commande depuis la reponse de l'IA
 (bloc de code s'il y en a un), et les 3 actions possibles (Copier / Inserer
 dans le terminal / Annuler) - jamais d'execution automatique."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from PySide6.QtWidgets import QApplication

tests/test_ai_danger.py

@@ -1,9 +1,11 @@
 """Detection locale de commandes potentiellement destructives proposees par
 l'assistant IA (jamais un blocage, seulement un avertissement)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
-from app.ai.danger import is_dangerous, check_dangerous
+from app.ai.danger import check_dangerous, is_dangerous
 
 print("=== 1. Commandes destructrices detectees ===")
 dangerous_examples = [

tests/test_ai_panel.py

@@ -2,7 +2,9 @@
 la verification de securite (avis + secrets) est bien invoquee avant tout
 envoi, que les reponses/erreurs mettent a jour la conversation, et qu'une
 reponse perimee (generation obsolete) est ignoree."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from unittest.mock import patch
@@ -10,9 +12,9 @@ from unittest.mock import patch
 from PySide6.QtCore import QCoreApplication
 from PySide6.QtWidgets import QApplication
 
-from app.ai.provider import AIProvider, AIError
-from app.ai.service import KIND_EXPLAIN, KIND_ASK
-from app.dialogs.ai_prompts import MASK, SEND, CANCEL
+from app.ai.provider import AIError, AIProvider
+from app.ai.service import KIND_EXPLAIN
+from app.dialogs.ai_prompts import CANCEL, MASK, SEND
 from app.ui.ai_panel import AIPanel
 
 app = QApplication.instance() or QApplication(sys.argv)

tests/test_ai_prompts.py

@@ -3,7 +3,9 @@ affiche une seule fois (persist dans app_settings, redirige vers un fichier
 temporaire), et verification des secrets a chaque envoi. QMessageBox est
 simule (exec()/clickedButton() patches) : aucune boite modale reelle ne doit
 bloquer les tests."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
@@ -13,7 +15,13 @@ from unittest.mock import patch
 from PySide6.QtWidgets import QApplication, QMessageBox
 
 import app.app_settings as app_settings
-from app.dialogs.ai_prompts import ensure_ai_notice_acknowledged, confirm_sensitive_content, MASK, SEND, CANCEL
+from app.dialogs.ai_prompts import (
+    CANCEL,
+    MASK,
+    SEND,
+    confirm_sensitive_content,
+    ensure_ai_notice_acknowledged,
+)
 
 app = QApplication.instance() or QApplication(sys.argv)
 

tests/test_ai_provider.py

@@ -1,15 +1,17 @@
 """OpenAICompatibleProvider : requete HTTP construite correctement, et gestion
 des erreurs (401, 429, timeout, reseau, reponse invalide) - urllib.request.urlopen
 est entierement mocke, aucun appel reseau reel."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import io
 import json
 import urllib.error
-from unittest.mock import patch, MagicMock
+from unittest.mock import MagicMock, patch
 
-from app.ai.provider import AIProvider, AIError, OpenAICompatibleProvider
+from app.ai.provider import AIError, AIProvider, OpenAICompatibleProvider
 
 
 def fake_response(payload: dict):

tests/test_ai_redaction.py

@@ -1,5 +1,7 @@
 """Detection/redaction de secrets avant envoi a l'assistant IA."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from app.ai.redaction import detect_secrets, redact
@@ -16,8 +18,8 @@ print("=== 2. Jeton Bearer detecte ===")
 found = detect_secrets("Authorization: Bearer sk-abcdefghijklmnopqrstuvwxyz123456")
 labels = [f.label for f in found]
 print("  detecte:", labels)
-assert any("bearer" in l.lower() for l in labels)
-assert any("authorization" in l.lower() for l in labels)
+assert any("bearer" in label.lower() for label in labels)
+assert any("authorization" in label.lower() for label in labels)
 print("  OK")
 
 print()

tests/test_ai_service.py

@@ -1,7 +1,9 @@
 """AIRequestWorker : execution d'une requete IA dans un vrai QThread en
 arriere-plan, jamais sur le thread Qt principal - avec dispatch correct selon
 le type de requete et remontee des erreurs via signal plutot qu'exception."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import threading
@@ -9,9 +11,15 @@ import threading
 from PySide6.QtCore import QCoreApplication
 from PySide6.QtWidgets import QApplication
 
-from app.ai.provider import AIProvider, AIError
+from app.ai.provider import AIError, AIProvider
 from app.ai.service import (
-    AIRequestWorker, KIND_EXPLAIN, KIND_DIAGNOSE, KIND_SOLUTION, KIND_GENERATE, KIND_ASK, KIND_TEST,
+    KIND_ASK,
+    KIND_DIAGNOSE,
+    KIND_EXPLAIN,
+    KIND_GENERATE,
+    KIND_SOLUTION,
+    KIND_TEST,
+    AIRequestWorker,
 )
 
 app = QApplication.instance() or QApplication(sys.argv)

tests/test_ai_settings.py

@@ -2,20 +2,28 @@
 app_settings (redirige vers un fichier temporaire pour ne jamais toucher les
 vrais reglages), cle API exclusivement via CredentialStore, et construction du
 fournisseur a partir des deux."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
 from pathlib import Path
 from unittest.mock import patch
 
-from app.credentials import CredentialStore
-from app.ai.settings import (
-    AISettings, load_ai_settings, save_ai_settings, load_api_key, save_api_key,
-    build_provider_from_settings, AI_API_KEY_CREDENTIAL, DEFAULT_BASE_URL,
-)
-from app.ai.provider import OpenAICompatibleProvider
 import app.app_settings as app_settings
+from app.ai.provider import OpenAICompatibleProvider
+from app.ai.settings import (
+    AI_API_KEY_CREDENTIAL,
+    DEFAULT_BASE_URL,
+    AISettings,
+    build_provider_from_settings,
+    load_ai_settings,
+    load_api_key,
+    save_ai_settings,
+    save_api_key,
+)
+from app.credentials import CredentialStore
 
 
 class FakeCredentialStore(CredentialStore):

tests/test_ai_tab_integration.py

@@ -5,7 +5,9 @@ automatiquement, avec avertissement si dangereuse).
 
 LocalTerminalConnection.start() est neutralisee comme dans test_snippets.py :
 aucun sous-processus reel, send() depose seulement les octets dans une file."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from unittest.mock import patch
@@ -13,9 +15,9 @@ from unittest.mock import patch
 from PySide6.QtCore import QCoreApplication
 from PySide6.QtWidgets import QApplication
 
-from app.local_terminal import LocalTerminalConnection
 from app.ai.provider import AIProvider
 from app.dialogs.ai_prompts import SEND
+from app.local_terminal import LocalTerminalConnection
 from app.ui.ai_panel import AIPanel
 from app.ui.tabs import LocalTerminalTabWidget
 

tests/test_atomic_storage.py

@@ -1,16 +1,18 @@
 """Stockage JSON : ecriture atomique, schema_version, migration, recuperation
 automatique depuis .bak quand le fichier principal est corrompu."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import json
 import tempfile
 from pathlib import Path
 
+from app.key_manager import KeyManager, compute_fingerprint
+from app.session_manager import Session, SessionStore
 from app.storage.atomic_file import atomic_write_text
 from app.storage.json_store import load_json_document, save_json_document
-from app.session_manager import SessionStore, Session
-from app.key_manager import KeyManager, compute_fingerprint
 
 tmp = Path(tempfile.mkdtemp())
 

tests/test_auto_reconnect.py

@@ -9,7 +9,9 @@ de programmation du cote de l'onglet, qui n'a besoin d'aucune connexion reseau
 reelle - cela evite aussi qu'un thread reste bloque dans un connect() lent et
 ne bloque la fin du script.
 """
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import time

tests/test_bastion.py

@@ -1,7 +1,9 @@
 """ProxyJump / Bastion : resolution (app.bastion) pour les 3 sources (session,
 OpenSSH, manuel), et etablissement du canal direct-tcpip par SSHConnection via
 un bastion entierement mocke (aucun reseau reel)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
@@ -10,12 +12,18 @@ from unittest.mock import MagicMock, patch
 
 from PySide6.QtWidgets import QApplication
 
+from app.bastion import BastionResolutionError, BastionTarget, resolve_bastion_target
 from app.session_manager import (
-    SessionStore, Session, BastionConfig,
-    AUTH_AUTO, AUTH_KEY,
-    BASTION_NONE, BASTION_SESSION, BASTION_OPENSSH, BASTION_MANUAL,
+    AUTH_AUTO,
+    AUTH_KEY,
+    BASTION_MANUAL,
+    BASTION_NONE,
+    BASTION_OPENSSH,
+    BASTION_SESSION,
+    BastionConfig,
+    Session,
+    SessionStore,
 )
-from app.bastion import resolve_bastion_target, BastionResolutionError, BastionTarget
 
 app = QApplication.instance() or QApplication([])
 

tests/test_clipboard.py

@@ -1,9 +1,11 @@
 """Copier/coller du terminal : selection, presse-papiers, raccourcis."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
-from PySide6.QtWidgets import QApplication
+from PySide6.QtCore import QEvent, QPoint, Qt
 from PySide6.QtGui import QKeyEvent
-from PySide6.QtCore import QEvent, Qt, QPoint
+from PySide6.QtWidgets import QApplication
 
 from app.terminal_widget import TerminalWidget
 
@@ -90,8 +92,8 @@ print("  OK")
 
 print()
 print("=== 9. Souris : selection = copie, clic droit = collage (comme sous Unix) ===")
-from PySide6.QtGui import QMouseEvent, QContextMenuEvent
 from PySide6.QtCore import QPointF
+from PySide6.QtGui import QContextMenuEvent, QMouseEvent
 
 
 def clic(bouton, col, row, type_evt=QEvent.MouseButtonPress):

tests/test_credentials.py

@@ -4,7 +4,9 @@ passe (ConnectionController, bastion, suppression de session).
 
 SSHConnection.start() est neutralisee pour les tests d'integration qui
 construisent un onglet reel (aucune connexion reseau necessaire)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import json
@@ -12,18 +14,21 @@ import tempfile
 from pathlib import Path
 from unittest.mock import patch
 
-from PySide6.QtWidgets import QApplication, QWidget, QMessageBox
+from PySide6.QtWidgets import QApplication, QMessageBox, QWidget
 
-from app.credentials import (
-    CredentialStore, NullCredentialStore, WindowsCredentialStore, session_credential_key,
-    default_credential_store,
-)
-from app.session_manager import Session, SessionStore, AUTH_PASSWORD, PASSWORD_STORAGE_SECURE
-from app.ssh_connection import SSHConnection
+from app.bastion import BastionTarget
 from app.controllers.broadcast_manager import BroadcastManager
 from app.controllers.connection_controller import ConnectionController
 from app.controllers.session_controller import SessionController
-from app.bastion import BastionTarget
+from app.credentials import (
+    CredentialStore,
+    NullCredentialStore,
+    WindowsCredentialStore,
+    default_credential_store,
+    session_credential_key,
+)
+from app.session_manager import AUTH_PASSWORD, PASSWORD_STORAGE_SECURE, Session, SessionStore
+from app.ssh_connection import SSHConnection
 
 app = QApplication.instance() or QApplication([])
 
@@ -103,6 +108,7 @@ session_store = SessionStore(path=tmp / "sessions.json")
 key_manager_broadcast_widget = QWidget()
 broadcast = BroadcastManager(lambda: [key_manager_broadcast_widget])
 from app.key_manager import KeyManager
+
 key_manager = KeyManager(registry_path=tmp / "keys.json")
 fake_store = FakeCredentialStore()
 cc = ConnectionController(session_store, key_manager, broadcast, credential_store=fake_store,

tests/test_detect.py

@@ -1,4 +1,6 @@
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 from app.main_window import detect_ssh_target
 

tests/test_full.py

@@ -1,6 +1,9 @@
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 from PySide6.QtWidgets import QApplication
+
 from app.main_window import MainWindow
 from app.theme import apply_theme, build_app_icon
 

tests/test_fuzzy.py

@@ -1,5 +1,7 @@
 """Recherche floue (app.services.fuzzy) : sous-sequence, score, tri."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from app.services.fuzzy import fuzzy_score

tests/test_keepalive.py

@@ -1,7 +1,9 @@
 """Keepalive de SSHConnection : verifie l'envoi periodique et l'abandon apres
 `keepalive_count_max` echecs consecutifs, avec un transport paramiko mocke
 (aucune connexion reseau reelle)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import threading

tests/test_key_protection.py

@@ -2,7 +2,9 @@
 (sans dependre des ACL reelles du systeme de fichiers, pour rester fiable quelle
 que soit la machine qui execute le test) et le bon aiguillage vers le repli chmod
 ailleurs que sous Windows."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import os
@@ -11,7 +13,7 @@ import tempfile
 from pathlib import Path
 from unittest.mock import patch
 
-from app.security.key_protection import protect_private_key, _protect_windows
+from app.security.key_protection import _protect_windows, protect_private_key
 
 tmp = Path(tempfile.mkdtemp())
 key_file = tmp / "id_test"

tests/test_keys.py

@@ -1,6 +1,8 @@
 """Generation de cles SSH : tous les types proposes doivent produire une cle
 relisible par paramiko, donc utilisable pour se connecter."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
@@ -9,7 +11,11 @@ from pathlib import Path
 import paramiko
 
 from app.key_manager import (
-    KeyManager, KEY_TYPE_LABELS, KEY_TYPE_RSA, KEY_TYPE_ED25519, ECDSA_CURVES,
+    ECDSA_CURVES,
+    KEY_TYPE_ED25519,
+    KEY_TYPE_LABELS,
+    KEY_TYPE_RSA,
+    KeyManager,
 )
 
 tmp = Path(tempfile.mkdtemp())

tests/test_no_secrets_in_errors.py

@@ -4,14 +4,16 @@ sont les seuls endroits, en dehors des fichiers de stockage deja couverts par
 test_credentials.py/test_ai_settings.py, ou un secret pourrait fuiter sans
 etre ecrit intentionnellement (une boite de dialogue d'erreur, une trace
 affichee a l'utilisateur ou capturee dans un rapport de bug)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import io
 import urllib.error
-from unittest.mock import patch, MagicMock
+from unittest.mock import MagicMock, patch
 
-from app.ai.provider import OpenAICompatibleProvider, AIError
+from app.ai.provider import AIError, OpenAICompatibleProvider
 
 SECRET_API_KEY = "sk-tres-secret-ne-jamais-fuiter-1234567890"
 

tests/test_openssh_config.py

@@ -1,5 +1,7 @@
 """Lecture de ~/.ssh/config : hosts detectes, champs minimum, conversion en Session."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile

tests/test_quick_connect.py

@@ -5,29 +5,31 @@ activation.
 SSHConnection.start()/LocalTerminalConnection.start() sont neutralisees, et
 ~/.ssh/config est redirige vers un fichier absent (pas de dependance au poste
 qui execute le test)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
 from pathlib import Path
 from unittest.mock import patch
 
-from PySide6.QtCore import Qt, QEvent
+from PySide6.QtCore import QEvent, Qt
 from PySide6.QtGui import QKeyEvent
 from PySide6.QtWidgets import QApplication, QWidget
 
-from app.session_manager import Session, SessionStore
-from app.key_manager import KeyManager
-from app.ssh_connection import SSHConnection
-from app.local_terminal import LocalTerminalConnection
+import app.app_settings as app_settings
 from app.controllers.broadcast_manager import BroadcastManager
 from app.controllers.connection_controller import ConnectionController
 from app.controllers.session_controller import SessionController
 from app.controllers.workspace_manager import WorkspaceManager
-from app.workspace import WorkspaceStore
-from app.snippets import Snippet, SnippetStore
 from app.dialogs.quick_connect_dialog import QuickConnectDialog
-import app.app_settings as app_settings
+from app.key_manager import KeyManager
+from app.local_terminal import LocalTerminalConnection
+from app.session_manager import Session, SessionStore
+from app.snippets import Snippet, SnippetStore
+from app.ssh_connection import SSHConnection
+from app.workspace import WorkspaceStore
 
 app = QApplication.instance() or QApplication([])
 
@@ -118,6 +120,7 @@ dialog2._activate_current()
 print(f"  onglets avant/apres activation: {before}/{cc2.tabs.count()}")
 assert cc2.tabs.count() == before + 1
 from app.ui.tabs import SessionTabWidget
+
 assert isinstance(cc2.tabs.widget(cc2.tabs.count() - 1), SessionTabWidget)
 print("  OK")
 

tests/test_reconnect_backoff.py

@@ -1,5 +1,7 @@
 """Calcul du delai de reconnexion automatique (backoff exponentiel plafonne)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 from app.services.reconnect import compute_backoff_delay

tests/test_session_dialog_bastion.py

@@ -1,6 +1,8 @@
 """Editeur de session : section Bastion / Jump Host (construction, pre-remplissage
 a l'edition, et resultat renvoye pour chacun des 4 modes)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
@@ -9,12 +11,18 @@ from unittest.mock import patch
 
 from PySide6.QtWidgets import QApplication
 
-from app.session_manager import (
-    SessionStore, Session, BastionConfig,
-    BASTION_NONE, BASTION_SESSION, BASTION_OPENSSH, BASTION_MANUAL, AUTH_KEY,
-)
-from app.key_manager import KeyManager
 from app.dialogs.session_dialog import SessionDialog
+from app.key_manager import KeyManager
+from app.session_manager import (
+    AUTH_KEY,
+    BASTION_MANUAL,
+    BASTION_NONE,
+    BASTION_OPENSSH,
+    BASTION_SESSION,
+    BastionConfig,
+    Session,
+    SessionStore,
+)
 
 app = QApplication.instance() or QApplication([])
 

tests/test_sftp.py

@@ -1,8 +1,9 @@
 """Test de la logique SFTP avec un client SFTP simule (adosse a un dossier temporaire)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 import os
-import posixpath
 import shutil
 import stat as statmod
 import tempfile
@@ -10,9 +11,8 @@ import time
 from pathlib import Path
 
 from PySide6.QtWidgets import QApplication
-from PySide6.QtCore import Qt
 
-from app.sftp_panel import SFTPPanel, TransferJob, NAME_ROLE, ISDIR_ROLE, PARENT_ROLE
+from app.sftp_panel import NAME_ROLE, PARENT_ROLE, SFTPPanel
 
 
 class FakeAttr:

tests/test_snippets.py

@@ -4,18 +4,20 @@
 LocalTerminalConnection.start() est neutralisee : send() ne fait que deposer
 les octets dans une file interne (aucun sous-processus reel), ce qui suffit a
 verifier ce qui a ete envoye sans avoir besoin d'un vrai terminal."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
 from pathlib import Path
 from unittest.mock import patch
 
-from PySide6.QtWidgets import QApplication, QWidget
+from PySide6.QtWidgets import QApplication
 
-from app.snippets import Snippet, SnippetStore, DEFAULT_SNIPPETS
-from app.local_terminal import LocalTerminalConnection
 from app.controllers.broadcast_manager import BroadcastManager
+from app.local_terminal import LocalTerminalConnection
+from app.snippets import DEFAULT_SNIPPETS, Snippet, SnippetStore
 from app.ui.tabs import LocalTerminalTabWidget
 
 app = QApplication.instance() or QApplication([])

tests/test_socks_tunnel.py

@@ -2,14 +2,16 @@
 correctement la destination demandee par le client puis relaie le trafic a
 travers un (faux) transport SSH -- sans connexion SSH reelle, comme le fait
 deja test_tunnels.py pour la redirection locale."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import socket
 import threading
 import time
 
-from app.tunnels import TunnelManager, DIRECTION_DYNAMIC
+from app.tunnels import DIRECTION_DYNAMIC, TunnelManager
 
 
 class EchoServer(threading.Thread):

tests/test_split_terminal.py

@@ -5,7 +5,9 @@ fermeture globale d'un onglet divise.
 SSHConnection.start() et LocalTerminalConnection.start() sont neutralisees :
 ce module teste l'agencement des panneaux et le cycle de vie des onglets, pas
 une vraie connexion (deja couverte par test_keepalive.py / test_bastion.py)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import itertools
@@ -15,14 +17,13 @@ from unittest.mock import patch
 
 from PySide6.QtWidgets import QApplication, QWidget
 
-from app.session_manager import SessionStore
-from app.key_manager import KeyManager
-from app.ssh_connection import SSHConnection
-from app.local_terminal import LocalTerminalConnection
 from app.controllers.broadcast_manager import BroadcastManager
 from app.controllers.connection_controller import ConnectionController
-from app.ui.tabs import LocalTerminalTabWidget
-from app.ui.split_pane import SplitContainer, LAYOUT_2V, LAYOUT_4
+from app.key_manager import KeyManager
+from app.local_terminal import LocalTerminalConnection
+from app.session_manager import SessionStore
+from app.ssh_connection import SSHConnection
+from app.ui.split_pane import LAYOUT_2V, LAYOUT_4, SplitContainer
 
 app = QApplication.instance() or QApplication([])
 

tests/test_tags_and_groups.py

@@ -1,7 +1,9 @@
 """Tags de session et parametres par defaut d'un groupe : persistance, saisie/
 normalisation des tags dans l'editeur, heritage explicite, filtrage par tag
 dans le panneau lateral."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import tempfile
@@ -10,12 +12,12 @@ from unittest.mock import patch
 
 from PySide6.QtWidgets import QApplication, QWidget
 
-from app.session_manager import Session, SessionStore, AUTH_KEY
-from app.key_manager import KeyManager
-from app.groups import GroupSettings, GroupSettingsStore
-from app.dialogs.session_dialog import SessionDialog
 from app.controllers.broadcast_manager import BroadcastManager
 from app.controllers.session_controller import SessionController
+from app.dialogs.session_dialog import SessionDialog
+from app.groups import GroupSettings, GroupSettingsStore
+from app.key_manager import KeyManager
+from app.session_manager import AUTH_KEY, Session, SessionStore
 
 app = QApplication.instance() or QApplication([])
 

tests/test_terminal_comfort.py

@@ -1,10 +1,12 @@
 """Confort du terminal : zoom de police, barre de defilement, recherche dans l'historique."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
-from PySide6.QtWidgets import QApplication
-from PySide6.QtGui import QKeyEvent
 from PySide6.QtCore import QEvent, Qt
+from PySide6.QtGui import QKeyEvent
+from PySide6.QtWidgets import QApplication
 
 from app.terminal_widget import TerminalWidget
 

tests/test_tunnels.py

@@ -4,14 +4,16 @@ Le test monte un vrai serveur TCP local et un faux transport SSH dont le canal
 'direct-tcpip' est un simple socket vers ce serveur : cela valide toute la
 mecanique de relais sans avoir besoin d'un serveur SSH.
 """
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import socket
 import threading
 import time
 
-from app.tunnels import TunnelManager, DIRECTION_LOCAL, describe
+from app.tunnels import DIRECTION_LOCAL, TunnelManager, describe
 
 
 class EchoServer(threading.Thread):

tests/test_workspace.py

@@ -6,7 +6,9 @@ SSHConnection.start()/LocalTerminalConnection.start() sont neutralisees (pas de
 connexion reelle necessaire). app.app_settings.SETTINGS_FILE est redirige vers
 un fichier temporaire pour ne jamais toucher les vrais reglages de l'utilisateur
 (restore() met a jour last_workspace_id a chaque restauration)."""
-import sys, pathlib
+import pathlib
+import sys
+
 sys.path.insert(0, str(pathlib.Path(__file__).resolve().parent.parent))
 
 import itertools
@@ -16,18 +18,20 @@ from unittest.mock import patch
 
 from PySide6.QtWidgets import QApplication, QWidget
 
-from app.session_manager import Session, SessionStore
-from app.key_manager import KeyManager
-from app.ssh_connection import SSHConnection
-from app.local_terminal import LocalTerminalConnection
+import app.app_settings as app_settings
 from app.controllers.broadcast_manager import BroadcastManager
 from app.controllers.connection_controller import ConnectionController
 from app.controllers.workspace_manager import (
-    WorkspaceManager, SETTING_RESTORE_ON_STARTUP, SETTING_LAST_WORKSPACE_ID,
+    SETTING_LAST_WORKSPACE_ID,
+    SETTING_RESTORE_ON_STARTUP,
+    WorkspaceManager,
 )
-from app.workspace import WorkspaceStore, ITEM_SESSION_SSH, ITEM_LOCAL_SHELL
+from app.key_manager import KeyManager
+from app.local_terminal import LocalTerminalConnection
+from app.session_manager import Session, SessionStore
+from app.ssh_connection import SSHConnection
 from app.ui.split_pane import LAYOUT_2V
-import app.app_settings as app_settings
+from app.workspace import ITEM_LOCAL_SHELL, ITEM_SESSION_SSH, WorkspaceStore
 
 app = QApplication.instance() or QApplication([])
 
@@ -95,7 +99,8 @@ print(f"  onglets ouverts: {cc2.tabs.count()}, elements ignores: {skipped}")
 assert cc2.tabs.count() == 2
 assert skipped == 0
 from app.ui.split_pane import SplitContainer
-from app.ui.tabs import SessionTabWidget, LocalTerminalTabWidget
+from app.ui.tabs import LocalTerminalTabWidget, SessionTabWidget
+
 assert isinstance(cc2.tabs.widget(0), LocalTerminalTabWidget)
 container = cc2.tabs.widget(1)
 assert isinstance(container, SplitContainer)